Your grey trousers have served you for three years and still look good, while the jacket that went with them has a frayed collar. The arithmetic sounds natural: have only the jacket made, and it should cost about half. But what a made-to-measure suit jacket costs is not a simple division by two. It depends on the cloth code, the style of the jacket, and also on whether the new jacket will “work” with the trousers you already own. This article separates out each item so that you can work it out before walking into a showroom.
Quick answer
Mon Amie publishes its made-to-measure prices for a full suit (jacket and trousers): from VND 4.8 million (Essential), VND 10 – 20 million (Signature), and above VND 20 million up to VND 60 million (Heritage). A single jacket costs less than the full suit because it uses less cloth and less labour, but the difference depends on the cloth code and the jacket style, not on a fixed ratio. Single-jacket prices are quoted specifically at the showroom.
How much does a suit jacket cost: the full-suit price as a benchmark
Mon Amie divides full-suit made-to-measure pricing (jacket and trousers) into three lines. This is the benchmark to have in mind before you ask about a single jacket:
| Line | Full-suit price (jacket + trousers) | Cloth |
|---|---|---|
| Essential | VND 4.8 – 10 million | Kevinlli 40–70% wool (100s–140s) |
| Signature | VND 10 – 20 million | Kevinlli 80–100% wool 140s–150s, Dolce & Taylor, Luciano, Salford, Vercelli |
| Heritage | Above VND 20 million, up to VND 60 million | Canonico, Holland Sherry, Dormeuil, Scabal |
A single-jacket price is not published as one common figure because each cloth code is priced differently; you can see the full table on the price list page and in the article suit tailoring prices: a breakdown of the cost of one suit to understand each item.
Why a single jacket isn't half the price of a suit
The jacket is the most complex and labour-intensive part of the whole suit. A jacket needs its own pattern for the shoulder, armhole and chest, plus the chest construction and lapels, lining, pockets, buttons and sleeves; trousers are far simpler. So when the two are separated, the saving is smaller than many people think, because the most labour-heavy part is still there. On the other hand, the jacket also uses more cloth than the trousers, so the cloth cost of a single jacket is still the largest item.
Put another way: dropping the trousers saves a smaller share, not a half. Don't expect the price of a single jacket to be exactly half the price of a suit.
When a single jacket is all you need
A standalone jacket (usually called a blazer when worn with trousers of a different colour) suits the following cases:
- You want a blazer to wear with many trousers: navy, beige, grey, chinos. A single navy blazer pairs with most of the trousers in your wardrobe.
- Trousers you already own are in the same colour family or have held up well, and you only need a new jacket for a loose match.
- Replacing a damaged or frayed jacket while the trousers are still good.
- Occasions that aren't formal: smart casual at the office, an informal meeting, a relaxed meeting with partners.
- Adding one more piece to your wardrobe: a patterned or light-coloured blazer for a change.
The article how to style a men's blazer sets out eight formulas for getting long wear from a single blazer.
When to have the full suit made
- Formal occasions: weddings, contract signings, major events, interviews for senior positions. A full suit in the same cloth, the same colour and the same cut always looks more serious than a jacket paired with different trousers.
- You want to wear a “suit” in the true sense: jacket and trousers from the same lot of cloth, with the colour matching exactly.
- You want to save on fitting effort: one measurement, one baste fitting, and both pieces match.
- Wearing suits every day: both pieces wear evenly, with no new jacket and old trousers drifting out of tone.
A full three-piece (with a waistcoat) is priced separately by cloth code, because the waistcoat uses extra cloth and extra labour.
Single jacket, two-piece and three-piece compared
| Item | Single jacket (blazer) | Two-piece (jacket + trousers) | Three-piece (with waistcoat) |
|---|---|---|---|
| Cloth | For the jacket | For jacket and trousers | Jacket, trousers and waistcoat |
| Labour | The most complex part | Plus the trousers | Plus the waistcoat |
| Price | By cloth code, quoted at the showroom | From VND 4.8 million to VND 60 million | Higher than a two-piece, quoted by cloth code |
| Suits | Flexible pairing, smart casual | Office, parties, weddings | Formal occasions, evening parties |
| Note | Choose a colour that pairs with many trousers | Cloth matched absolutely | The waistcoat must fit as well as the jacket |
An important note on cloth colour
This is where most people run into trouble when having a single jacket made to pair with old trousers:
- Worn trousers have shifted slightly in colour from washing, pressing and sunlight. A new jacket in the same cloth code may still look a little brighter.
- Two lots of cloth with the same name are not necessarily the same shade. Colour can vary between different import batches, so don't expect a jacket and trousers made months apart to match perfectly.
- If you do pair them, choose a jacket that differs clearly from the trousers in shade or pattern (a check blazer with plain trousers), rather than trying to create the illusion of “one suit”. For how to pair them, see wearing a jacket in a different colour from the trousers: 10 pairings.
- If you intend to have trousers made later, ask the stylist when choosing cloth whether the cloth code can be ordered again, and note down the specific cloth code.
What determines the price of a jacket
The price of a single jacket varies with five main factors:
- Cloth code: wool percentage, fibre fineness (Super 100s, 140s, 150s), mill.
- Jacket style: single- or double-breasted, number of pockets, lapel style.
- Canvas and lining: how the chest is built, the lining material.
- Pattern: striped and checked cloth must be pattern-matched when cut, using more cloth and more labour than plain cloth.
- Special details: embroidery, a custom patterned lining, special buttons.
What to ask when requesting a single-jacket quote
- Which cloth code, what percentage of wool, and which mill?
- Does the quote include the lining, buttons and canvas?
- How many baste fittings are there, and are adjustments after delivery charged?
- If I want trousers later, can the cloth code be ordered again?
- What is the expected delivery time?
Common mistakes
- Expecting a single jacket to cost half a suit. The most complex part is still the jacket.
- Having a jacket made separately to pair with old trousers of a different shade, which leads to a mismatch in tone.
- Comparing the price with ready-made jackets while forgetting the fit, the cloth and the alterations.
- Forgetting to ask about extras such as a patterned lining or special buttons.
- Choosing thin, shiny cloth to save money, with the result that the jacket quickly loses its shape.
Tips from a Mon Amie master tailor
The jacket is the piece that most needs to fit at the shoulder. When having a single jacket made, choose a cloth code that is durable and easy to pair, because the jacket will be worn with many trousers. Navy and mid grey are the two colours that pair most flexibly. The shoulder can't be altered much, so don't economise on the measurement and the baste fitting.
Frequently asked questions
How much does it cost to have a suit jacket made at Mon Amie?
Full-suit prices (jacket and trousers) start from VND 4.8 million. A single jacket is priced by cloth code and jacket style, and is quoted specifically at the showroom or by hotline 0888.111.118.
How much does a men's suit jacket cost if I only need a blazer for work?
It depends on the cloth code. An everyday blazer is usually chosen from the Essential or Signature line to balance price and durability. Bring the trousers you plan to pair it with to the showroom so that the colour can be matched.
How much does a made-to-measure suit jacket cost compared with buying off the rack?
Made-to-measure usually costs more than ready-to-wear of a similar cloth level, but it gives a fit true to the shoulder, a choice of cloth and the ability to adjust. If you compare prices alone, include the cost of altering a ready-made piece to fit.
How much should a men's suit jacket cost to last a long time?
There is no single figure. Cloth with a high wool content and good chest construction generally lasts longer, but care matters just as much: rotate your suits, hang them on a wide-shouldered hanger, and have them dry-cleaned properly.
Conclusion
The question of what a made-to-measure suit jacket costs has no single answer, because each cloth code has its own price. A single jacket is a sensible choice when you want flexibility, but don't expect it to cost half a suit. Ask for prices by specific cloth code, and think ahead about cloth colour and how it will pair with your trousers. Book a measuring appointment or experience bespoke tailoring at Mon Amie to get a detailed quote for exactly the jacket you need.